Product selection

Solar street light or solar flood light?

Both are solar outdoor lighting, and both come from the same catalogue. They are not competing versions of one product. A solar street light is built to light a road or a public area from a pole, and a solar flood light is built to light a defined surface from a fixed bracket. This page sets out the difference so you can tell which one your project actually needs before you shortlist models.

The short answer

It comes down to what you are lighting

The distinction that matters is the target and the mounting position. If the light has to reach the ground and the space beyond it, from height, it is a street light. If it has to hit a specific wall, yard, floor or face, it is a flood light.

Solar street lightMounted on a pole, aimed down and along the road, sized to light a road segment, a village road, a parking area or a public space. Covered in solar street lights, in split and all-in-one constructions.
Solar flood lightMounted on a wall or bracket at height, aimed at a specific area, sized to light a yard, a warehouse exterior, a farm building, a perimeter or a courtyard. Covered in solar flood lights.
Both are off-gridEach type is a self-contained unit with its own panel, battery and controller. Neither needs a cable run to the mains, which is why both are used where grid connection is missing, expensive or slow.
Both share the same commercial termsMOQ is usually 100 pcs, lead time is usually 15 to 30 days subject to order confirmation, and warranty is 1 to 2 years depending on the product and order confirmation.

Side by side

Where the two differ in practice

The table below compares the two on the inputs that actually change a specification. Everything here is a decision rule, not a marketing claim.

Decision pointSolar street lightSolar flood light
What it lightsA road, lane, public area or parking space, and the ground around itA defined area or surface: yard, wall, warehouse front, farm building, perimeter
Typical mountingOn a pole, above head height, above the road surfaceOn a wall or bracket, angled toward the target area
Direction of lightDownward and forward along the road axisConcentrated toward one target, often adjustable
Key site inputRoad width, pole height, lighting hours, spacing between polesArea to be covered, mounting height and distance to the target
Most common buyerDistributors, EPC contractors, road project suppliers, municipal programme buyersInstallers, farms and agricultural distributors, warehouse and yard operators, hardware channels
Model families in the catalogueSplit solar street lights and all-in-one solar street lights, including camera and traffic warning variantsSplit solar flood lights, folding solar flood lights and standalone flood light series
Where to startSolar street light buying guide and road project information checklistSolar flood light buying guide and pest killer lights for farms and orchards

Where the choice gets confused

Three situations that look like one product

A yard that needs uniform lightIf the area is open and people or vehicles move through it, a pole-mounted street light usually serves it better than a bracket flood light, because it spreads light over the ground instead of concentrating it on one point.
A wall or facade that must be litA flood light is the right tool. A street light aimed at the same wall would waste most of its output on the ground in front of it.
A site that needs bothRoad lighting along the access route plus flood lighting on the compound wall or warehouse front is a normal combination in the same order. Send the whole scope in one enquiry so the factory can confirm the mix and the delivery plan together.

Next step

Shortlist from the catalogue

Once the type is settled, the model is chosen by configuration rather than by wattage alone. The model parameter library lists the catalogue grade, LED quantity, panel rating, battery capacity and body size for every listed model, so the shortlist can be compared on catalogue figures instead of on labels.

All street light modelsSplit, all-in-one, camera and traffic warning variants. Solar street lights.
All flood light modelsSplit, folding and standalone series. Solar flood lights.
Specification index85 series and 359 configurations with listed parameters. Model parameter library.
Related comparisonIf you are comparing two solar street light constructions instead of two product types, see split vs all-in-one solar street lights.

FAQ

Questions buyers ask

Is a solar flood light the same as a solar street light?

No. Both are self-contained solar lights with their own panel, battery and controller, but they are built for different targets. A solar street light is mounted on a pole and lights a road or public area along the ground. A solar flood light is mounted on a wall or bracket and is aimed at a specific area or surface such as a yard, warehouse front or farm building.

Can a solar flood light be used for street lighting?

It can light a small area, but it is the wrong tool for a road. A flood light concentrates its output toward one target, so a road needs a pole-mounted unit that spreads light along the ground. For an open yard that vehicles cross, a street light is normally the better specification.

Which is easier to install without grid power?

Both are equally independent of the grid. Each carries its own panel, battery and controller, so neither needs a cable run to the mains. The installation effort difference comes from the mounting position: a pole requires a pole and its foundation, while a flood light needs a wall or bracket that can carry the load.

Do solar street lights and solar flood lights share the same MOQ and lead time?

Yes. MOQ is usually 100 pcs and lead time is usually 15 to 30 days, subject to order confirmation and production scheduling. Warranty is 1 to 2 years depending on the product and order confirmation.

Can I order both types in the same order?

Send the models, quantities, application and destination country together. The quotation then confirms the combined model list, configuration, packing, applicable documents and the delivery plan across the whole order rather than product line by product line.

How do I choose a model within the type I need?

Use the model parameter library, which lists catalogue grade, LED quantity, solar panel rating, battery capacity and body size for every listed model. Compare the listed configuration against the site input, then confirm the selected configuration in the quotation.

WhatsApp