Kenya
Solar street lights for Kenya
Minglong Solar Lighting is a manufacturer in Linyi, Shandong, China, producing
since 2010 with 300+ solar lighting models and a monthly capacity of 30,000 units. This page sets out
the solar resource at Nairobi, the import and certification route for Kenya, and the configuration
questions that decide whether a solar street light is the right answer on your site.
Verified local data
Solar resource in Kenya
In-plane irradiation is the figure used to size an off-grid light, because it describes what
the tilted panel actually receives rather than what falls on horizontal ground. The values below
come from PVGIS v5.3, the European Commission Joint Research Centre solar dataset, for a fixed
25-degree plane facing the equator - south-facing at northern-hemisphere sites and north-facing
at southern-hemisphere sites. They were cross-checked against NASA POWER for the same coordinates.
A different on-site tilt or azimuth changes the yield and should be confirmed per project.
5.01kWh/m2/day annual average
4.10lowest month, kWh/m2/day
6.16highest month, kWh/m2/day
1825kWh/m2 per year
The annual average alone does not size a light. The lowest month is what sets the
battery requirement, because that is when the panel has to recharge the battery through a run of
poor days. Send us the number of consecutive days your site needs to hold and we will size the
configuration against that figure rather than against the average.
Market entry
Import and certification requirements in Kenya
Requirements are confirmed per shipment with the importer of record.
Kenya import requirements
Scheme: PVoC (Pre-shipment Verification of Conformity), run by KEBS
Goods in the regulated import list must obtain a Certificate of Conformity (CoC) before shipment; the CoC is presented at the port for customs clearance. Test reports must come from an ISO 17025 accredited or national laboratory. From 1 July 2025 a Certificate of Origin must accompany the CoC, and the CoC is valid for three months.
Who handles it: The importer of record handles the PVoC application. The exporter supplies the test reports and supporting documents.
Minglong supplies the CE and RoHS documentation and the supporting test data for the technical file. Test reports for a pre-shipment scheme are expected to come from an ISO 17025 accredited laboratory.
On the ground
What the Kenya market looks like
- Solar resource
- In-plane irradiation on a 25-degree equator-facing plane averages 5.01 kWh/m2 per day in Nairobi, ranging from about 4.10 in July to about 6.16 in March (PVGIS v5.3).
- Climate
- Two rainy seasons and a dry season; the July minimum is the low point for solar charging.
- Grid situation
- Low national grid coverage, with off-grid and mini-grid areas coexisting with urban supply.
- Typical applications
- Feeder roads, county roads, community grounds, peri-urban lighting schemes.
- Who buys
- County governments, road construction contractors, electrical material importers, distributors.
Product fit
Why the configuration matters here
- The all-in-one format removes the external battery cabinet, which is the part most often stolen where lighting is installed on unstaffed feeder roads.
- Rainy-day backup of 2-3 days matters in the two-season rainfall pattern, where a single dry spell is not the risk - consecutive cloudy days are.
Across the Minglong range the standard build is a die-cast aluminium and glass housing, IP65
protection, a monocrystalline silicon panel, a LiFePO4 battery, a 2835 LED chip at 120 LM/W for the
whole luminaire, 8-10 hours of charging, 6-8 hours of lighting per night, 2-3 days of rainy-day
backup, and an operating range of -25C to +65C. Minimum order quantity is 100 pieces with mixed
models allowed, lead time is 15-30 days, and OEM private label is supported down to logo, colour
box, outer carton and manual.
FAQ
Questions buyers ask about solar street lights in Kenya
Final model values and document applicability remain subject to confirmation.
Are PVoC and KEBS certificates required for solar street lights imported into Kenya?
Kenya operates a Pre-shipment Verification of Conformity programme run by the Kenya Bureau of Standards. Goods falling inside the regulated import list need a Certificate of Conformity issued before shipment and presented at the port for clearance. Test reports for the programme must come from an ISO 17025 accredited laboratory or a national laboratory. Minglong supplies the CE and RoHS documentation and the supporting test data; the importer of record lodges the application and holds the certificate.
How much sun does Nairobi actually get, and does that change the battery size?
In-plane irradiation on a 25-degree equator-facing plane in Nairobi averages 5.01 kWh/m2 per day across the year on the PVGIS v5.3 series, from about 4.10 in July to about 6.16 in March. The average is high enough for an off-grid light in most of the country, but the low month is what sizes the battery. Send us your site and the number of consecutive days you need the light to hold, and we will size the configuration against that rather than against the annual average.
Do solar street lights work where the grid does not reach?
Yes. A stand-alone solar light needs no grid connection at all, which is why the format is used on feeder roads and community schemes where the Kenyan grid does not reach. The unit carries its own panel, battery, controller and LED light source. The design point that matters is not the panel rating but the battery: standard build gives 2-3 days of rainy-day backup, and the configuration is confirmed against the site before the order.