Qatar
Solar street lights for Qatar
Minglong Solar Lighting is a manufacturer in Linyi, Shandong, China, producing
since 2010 with 300+ solar lighting models and a monthly capacity of 30,000 units. This page sets out
the solar resource at Doha, the import and certification route for Qatar, and the configuration
questions that decide whether a solar street light is the right answer on your site.
Verified local data
Solar resource in Qatar
In-plane irradiation is the figure used to size an off-grid light, because it describes what
the tilted panel actually receives rather than what falls on horizontal ground. The values below
come from PVGIS v5.3, the European Commission Joint Research Centre solar dataset, for a fixed
25-degree plane facing the equator - south-facing at northern-hemisphere sites and north-facing
at southern-hemisphere sites. They were cross-checked against NASA POWER for the same coordinates.
A different on-site tilt or azimuth changes the yield and should be confirmed per project.
6.31kWh/m2/day annual average
5.29lowest month, kWh/m2/day
7.11highest month, kWh/m2/day
2304kWh/m2 per year
The annual average alone does not size a light. The lowest month is what sets the
battery requirement, because that is when the panel has to recharge the battery through a run of
poor days. Send us the number of consecutive days your site needs to hold and we will size the
configuration against that figure rather than against the average.
Market entry
Import and certification requirements in Qatar
Requirements are confirmed per shipment with the importer of record.
Qatar import requirements
Scheme: Certificate of Conformity through the Qatar General Organization for Standards and Metrology / Ministry of Business and Trade
A mandatory Certificate of Conformity issued by an approved conformity assessment body is required for customs clearance for regulated electrical products. Separately, a Certificate of Origin is required for shipments.
Who handles it: The importer of record lodges the conformity assessment; recognised foreign test reports support the application.
Minglong supplies the CE and RoHS documentation and the supporting test data for the technical file. Test reports for a pre-shipment scheme are expected to come from an ISO 17025 accredited laboratory.
On the ground
What the Qatar market looks like
- Solar resource
- In-plane irradiation on a 25-degree equator-facing plane averages 6.31 kWh/m2 per day in Doha, ranging from about 5.29 in January to about 7.11 in September (PVGIS v5.3).
- Climate
- Extreme summer heat and dust-loaded air. Panel soiling reduces output, so cleaning access matters more than in a temperate market.
- Grid situation
- Full grid coverage, so the reason for solar here is running cost and carbon rather than off-grid access.
- Typical applications
- Campus and compound roads, car parks, stadium perimeters, industrial estate lighting, villa and housing compounds.
- Who buys
- Municipal EPC contractors, facility operators, electrical material distributors, project developers.
Product fit
Why the configuration matters here
- In-plane irradiation on a 25-degree equator-facing plane averages 6.31 kWh/m2 per day and stays above 5.29 even in the weakest month, so the sizing here is driven by heat and dust rather than by daylight hours.
- IP65 and a -25C to +65C operating range cover the summer envelope of this market.
Across the Minglong range the standard build is a die-cast aluminium and glass housing, IP65
protection, a monocrystalline silicon panel, a LiFePO4 battery, a 2835 LED chip at 120 LM/W for the
whole luminaire, 8-10 hours of charging, 6-8 hours of lighting per night, 2-3 days of rainy-day
backup, and an operating range of -25C to +65C. Minimum order quantity is 100 pieces with mixed
models allowed, lead time is 15-30 days, and OEM private label is supported down to logo, colour
box, outer carton and manual.
FAQ
Questions buyers ask about solar street lights in Qatar
Final model values and document applicability remain subject to confirmation.
How much solar energy is available in Qatar, and is that enough to run a light all night?
In-plane irradiation on a 25-degree equator-facing plane in Doha averages 6.31 kWh/m2 per day across the year on the PVGIS v5.3 series, from about 5.29 in January to about 7.11 in September. The limiting factor in Qatar is not daylight but dust and heat: a soiled panel loses output until it is cleaned. The catalogue build charges in 8-10 hours and runs 6-8 hours per night, and larger battery capacity is configurable when the site needs longer autonomy.
What certification does a solar street light need to clear customs in Qatar?
Regulated electrical products imported into Qatar need a Certificate of Conformity issued through the Qatar General Organization for Standards and Metrology and the Ministry of Business and Trade, using a body approved for that scheme. A Certificate of Origin is required alongside it. Minglong supplies CE and RoHS documentation and the test data that supports the conformity assessment; the importer of record lodges the application.
Will a solar street light hold up through a Qatar summer?
The rated operating temperature is -25C to +65C, which covers the summer envelope, and the enclosure is rated IP65 against dust and water ingress. The practical constraint in this market is panel soiling rather than temperature - dust-loaded air drops output until the panel is cleaned, so the cleaning interval you can commit to is part of the sizing conversation. Send us the site and the maintenance arrangement, and we will confirm the configuration against it.