Philippines
Solar street lights for Philippines
Minglong Solar Lighting is a manufacturer in Linyi, Shandong, China, producing
since 2010 with 300+ solar lighting models and a monthly capacity of 30,000 units. This page sets out
the solar resource at Manila, the import and certification route for Philippines, and the configuration
questions that decide whether a solar street light is the right answer on your site.
Verified local data
Solar resource in Philippines
In-plane irradiation is the figure used to size an off-grid light, because it describes what
the tilted panel actually receives rather than what falls on horizontal ground. The values below
come from PVGIS v5.3, the European Commission Joint Research Centre solar dataset, for a fixed
25-degree plane facing the equator - south-facing at northern-hemisphere sites and north-facing
at southern-hemisphere sites. They were cross-checked against NASA POWER for the same coordinates.
A different on-site tilt or azimuth changes the yield and should be confirmed per project.
4.87kWh/m2/day annual average
3.95lowest month, kWh/m2/day
5.83highest month, kWh/m2/day
1774kWh/m2 per year
The annual average alone does not size a light. The lowest month is what sets the
battery requirement, because that is when the panel has to recharge the battery through a run of
poor days. Send us the number of consecutive days your site needs to hold and we will size the
configuration against that figure rather than against the average.
Market entry
Import and certification requirements in Philippines
Requirements are confirmed per shipment with the importer of record.
Philippines import requirements
Scheme: DTI-BPS Product Certification under the Philippine Standards (PS) system
The Bureau of Philippine Standards runs compulsory product certification for products listed under the Product Certification Act and its implementing rules. The mandatory product certification list covers specified product groups, and solar street lights are not among the listed product groups. A PS certification campaign for photovoltaic and energy storage systems was publicised in 2026, so the scheme is being extended, and the applicability to a stand-alone solar luminaire should be confirmed per shipment.
Who handles it: The Philippine applicant must be a locally registered entity. Confirm the current list status before each order.
Minglong supplies the CE and RoHS documentation and the supporting test data for the technical file. Test reports for a pre-shipment scheme are expected to come from an ISO 17025 accredited laboratory.
On the ground
What the Philippines market looks like
- Solar resource
- In-plane irradiation on a 25-degree equator-facing plane averages 4.87 kWh/m2 per day in Manila, ranging from about 3.95 in July to about 5.83 in March (PVGIS v5.3).
- Climate
- Tropical with a pronounced wet season from roughly June to November and a drier winter, which reverses the usual pattern - the solar low point falls in the middle of the year.
- Grid situation
- Good in major cities and weak in island and rural areas.
- Typical applications
- Island and off-grid communities, fishing villages, agricultural estates, housing developments.
- Who buys
- Property developers, agricultural distributors, regional distributors, municipal engineers.
Product fit
Why the configuration matters here
- The July solar minimum in this market falls inside the wet season, so rainy-day backup is the deciding specification rather than annual insolation.
- Where a product is outside the compulsory list, the importer carries less certification cost and fewer pre-shipment hold-ups at the port.
Across the Minglong range the standard build is a die-cast aluminium and glass housing, IP65
protection, a monocrystalline silicon panel, a LiFePO4 battery, a 2835 LED chip at 120 LM/W for the
whole luminaire, 8-10 hours of charging, 6-8 hours of lighting per night, 2-3 days of rainy-day
backup, and an operating range of -25C to +65C. Minimum order quantity is 100 pieces with mixed
models allowed, lead time is 15-30 days, and OEM private label is supported down to logo, colour
box, outer carton and manual.
FAQ
Questions buyers ask about solar street lights in Philippines
Final model values and document applicability remain subject to confirmation.
Is DTI-BPS product certification required for solar street lights in the Philippines?
The Bureau of Philippine Standards runs compulsory product certification for product groups listed under the Product Certification Act. Solar street lights are not among the listed product groups, so the requirement does not currently apply to them. That picture is moving - a PS certification campaign covering photovoltaic and energy storage systems was publicised in 2026 - so the applicable status should be confirmed per shipment before ordering. Minglong supplies CE and RoHS documentation and test data either way, and the local applicant for any PS application must be a registered Philippine entity.
How long do solar street lights run during the Philippine wet season?
In-plane irradiation on a 25-degree equator-facing plane in Manila averages 4.87 kWh/m2 per day across the year on the PVGIS v5.3 series, from about 3.95 in July to about 5.83 in March. That makes consecutive cloudy days the sizing constraint. The standard build gives 2-3 days of rainy-day backup, and larger battery capacity is configurable on request. Send us the number of days you need to hold and we will size the configuration against that.
Do solar street lights work on islands and rural sites with no grid access?
That is the primary use case. A stand-alone solar light needs no grid connection, no trenching and no cabling run, so it can be installed on an island, a fishing village or an agricultural estate where the distribution network does not reach. The all-in-one format also keeps the battery inside the sealed housing, which matters on remote sites with no secure storage available. IP65 covers the humid, salt-laden coastal air typical of island locations. Send us the site conditions and we will confirm the configuration.