Brazil
Solar street lights for Brazil
Minglong Solar Lighting is a manufacturer in Linyi, Shandong, China, producing
since 2010 with 300+ solar lighting models and a monthly capacity of 30,000 units. This page sets out
the solar resource at Sao Paulo, the import and certification route for Brazil, and the configuration
questions that decide whether a solar street light is the right answer on your site.
Verified local data
Solar resource in Brazil
In-plane irradiation is the figure used to size an off-grid light, because it describes what
the tilted panel actually receives rather than what falls on horizontal ground. The values below
come from PVGIS v5.3, the European Commission Joint Research Centre solar dataset, for a fixed
25-degree plane facing the equator - south-facing at northern-hemisphere sites and north-facing
at southern-hemisphere sites. They were cross-checked against NASA POWER for the same coordinates.
A different on-site tilt or azimuth changes the yield and should be confirmed per project.
4.86kWh/m2/day annual average
4.26lowest month, kWh/m2/day
5.40highest month, kWh/m2/day
1771kWh/m2 per year
The annual average alone does not size a light. The lowest month is what sets the
battery requirement, because that is when the panel has to recharge the battery through a run of
poor days. Send us the number of consecutive days your site needs to hold and we will size the
configuration against that figure rather than against the average.
Market entry
Import and certification requirements in Brazil
Requirements are confirmed per shipment with the importer of record.
Brazil import requirements
Scheme: INMETRO conformity assessment - Portaria 231/2026
Portaria 231/2026, published on 5 May 2026, replaces Portaria 69/2022 and brings LED lamps and luminaires into a unified INMETRO assessment scope. The regulation references EMC requirements covering harmonics and voltage fluctuation, and adds performance controls for the dynamic stability of light output, lamp ignition and the rise-to-stable period. It also addresses optical flicker in dimmable and smart luminaires.
Who handles it: The Brazilian importer or its appointed certification body lodges the assessment with INMETRO.
Minglong supplies the CE and RoHS documentation and the supporting test data for the technical file. Test reports for a pre-shipment scheme are expected to come from an ISO 17025 accredited laboratory.
On the ground
What the Brazil market looks like
- Solar resource
- In-plane irradiation on a 25-degree equator-facing plane averages 4.86 kWh/m2 per day in Sao Paulo, ranging from about 4.26 in June to about 5.40 in February (PVGIS v5.3).
- Climate
- Tropical and subtropical, with a southern hemisphere low-solar period in the middle of the year.
- Grid situation
- Good in the south-east, uneven in the north and interior.
- Typical applications
- Municipal road lighting, rural and agricultural roads, industrial estate lighting, mining and remote site lighting.
- Who buys
- Electrical material distributors, municipal engineering companies, EPC contractors, agricultural cooperatives.
Product fit
Why the configuration matters here
- The southern low-solar period falls in June, when in-plane irradiation on a north-facing 25-degree plane drops to about 4.26 kWh/m2 per day - the battery has to be sized for that month, not the annual average of 4.86.
- A stand-alone unit removes the trenching and cabling that grid-fed lighting needs across long rural road stretches.
Across the Minglong range the standard build is a die-cast aluminium and glass housing, IP65
protection, a monocrystalline silicon panel, a LiFePO4 battery, a 2835 LED chip at 120 LM/W for the
whole luminaire, 8-10 hours of charging, 6-8 hours of lighting per night, 2-3 days of rainy-day
backup, and an operating range of -25C to +65C. Minimum order quantity is 100 pieces with mixed
models allowed, lead time is 15-30 days, and OEM private label is supported down to logo, colour
box, outer carton and manual.
FAQ
Questions buyers ask about solar street lights in Brazil
Final model values and document applicability remain subject to confirmation.
What does the new INMETRO regulation mean for LED luminaires in Brazil?
Portaria 231/2026, published on 5 May 2026, replaces Portaria 69/2022 and consolidates LED lamps and luminaires into a unified INMETRO conformity assessment scope. It references EMC requirements covering harmonics and voltage fluctuation, and adds performance controls for the dynamic stability of light output, lamp ignition and the rise-to-stable period, with optical flicker also assessed for dimmable and smart luminaires. The importer or its appointed certification body lodges the assessment with INMETRO. Minglong supplies CE and RoHS documentation and test data to support the technical file.
Is solar street light output enough in Brazil, particularly in the south?
It depends on the month rather than the year. In-plane irradiation on a 25-degree equator-facing plane in Sao Paulo averages 4.86 kWh/m2 per day across the year on the PVGIS v5.3 series, from about 4.26 in June to about 5.40 in February. A configuration sized on the annual average will be undersized in the winter, so the battery is set against the low month. Send us the site and the month that matters for you, and we will size it against that.
Are solar street lights practical for rural and agricultural road lighting in Brazil?
They are, because a stand-alone unit needs no grid connection, no trenching and no cable run - which is what makes it viable across long rural stretches where the network does not reach and where digging is expensive. The all-in-one format also keeps the battery inside the sealed housing rather than in a separate cabinet exposed on the roadside. The operating range of -25C to +65C covers the conditions. Send us the site details and we will confirm the configuration against them.