Indonesia

Solar street lights for Indonesia

Minglong Solar Lighting is a manufacturer in Linyi, Shandong, China, producing since 2010 with 300+ solar lighting models and a monthly capacity of 30,000 units. This page sets out the solar resource at Jakarta, the import and certification route for Indonesia, and the configuration questions that decide whether a solar street light is the right answer on your site.

Verified local data

Solar resource in Indonesia

In-plane irradiation is the figure used to size an off-grid light, because it describes what the tilted panel actually receives rather than what falls on horizontal ground. The values below come from PVGIS v5.3, the European Commission Joint Research Centre solar dataset, for a fixed 25-degree plane facing the equator - south-facing at northern-hemisphere sites and north-facing at southern-hemisphere sites. They were cross-checked against NASA POWER for the same coordinates. A different on-site tilt or azimuth changes the yield and should be confirmed per project.

5.31kWh/m2/day annual average
3.96lowest month, kWh/m2/day
6.48highest month, kWh/m2/day
1942kWh/m2 per year

The annual average alone does not size a light. The lowest month is what sets the battery requirement, because that is when the panel has to recharge the battery through a run of poor days. Send us the number of consecutive days your site needs to hold and we will size the configuration against that figure rather than against the average.

Market entry

Import and certification requirements in Indonesia

Requirements are confirmed per shipment with the importer of record.

Indonesia import requirements

Indonesia's import conformity and product certification regime for lighting was not verified in this research round. The applicable standard and the import licensing route must be confirmed with the importer of record before any statement is made to a buyer.

Minglong supplies the CE and RoHS documentation and the supporting test data for any conformity assessment the importer lodges. The applicable standard and the approval route should be confirmed with the importer of record before the order is placed, so that the document scope matches what the clearance process actually asks for.

On the ground

What the Indonesia market looks like

Solar resource
In-plane irradiation on a 25-degree equator-facing plane averages 5.31 kWh/m2 per day in Jakarta, ranging from about 3.96 in December to about 6.48 in August (PVGIS v5.3).
Climate
Equatorial with a pronounced wet season; on an equator-facing 25-degree plane the lowest irradiation month is December rather than mid-year.
Grid situation
Strong on Java, uneven outside it, and weak across the archipelago.
Typical applications
Village roads, plantation and agricultural estates, island settlements, industrial estate lighting, flood-prone areas.
Who buys
Distributors, plantation companies, municipal authorities, infrastructure contractors.

Product fit

Why the configuration matters here

Across the Minglong range the standard build is a die-cast aluminium and glass housing, IP65 protection, a monocrystalline silicon panel, a LiFePO4 battery, a 2835 LED chip at 120 LM/W for the whole luminaire, 8-10 hours of charging, 6-8 hours of lighting per night, 2-3 days of rainy-day backup, and an operating range of -25C to +65C. Minimum order quantity is 100 pieces with mixed models allowed, lead time is 15-30 days, and OEM private label is supported down to logo, colour box, outer carton and manual.

FAQ

Questions buyers ask about solar street lights in Indonesia

Final model values and document applicability remain subject to confirmation.

How much solar energy is available across Indonesia for off-grid lighting?

In-plane irradiation on a 25-degree equator-facing plane in Jakarta averages 5.31 kWh/m2 per day across the year on the PVGIS v5.3 series, from about 3.96 in December to about 6.48 in August. That is a moderate but consistent resource, which suits the standard battery configuration without pushing the cost up. The standard build gives 2-3 days of rainy-day backup, and larger capacity is configurable on request. Send us the site and we will size the configuration against it.

Do solar street lights work on island and plantation sites with no grid access?

That is the primary application. A stand-alone solar light needs no grid connection, no trenching and no cable run, which is what makes it viable on plantations, island settlements and rural roads where the distribution network does not reach. The all-in-one format keeps the battery inside the sealed housing - practical on sites with no secure storage. IP65 covers the humidity typical of the archipelago. Send us the site conditions and we will confirm the configuration.

Which product type should be chosen for the wet season in Indonesia?

The choice is normally the all-in-one type for sites without grid access, because it removes the separate battery enclosure and the cabling between components. On the battery side, the rainy-day figure is the deciding specification: the lowest irradiation month is December, inside the wet season, so the configuration is sized for consecutive cloudy days rather than for the annual average. Send us the number of days you need the light to hold, and the minimum number of consecutive days, and we will size it against that.

WhatsApp